B0240low severityBody
Sunroof Motor Circuit
on 2005 Chrysler 300 2.7L V6 · RWD
What this code means
Malfunction in the sunroof/moonroof motor circuit. The sunroof does not open, close, or tilt.
Symptoms
- Sunroof does not move
- Sunroof opens but will not close
- Motor noise but no movement
- Sunroof switch unresponsive
Common causes
- Faulty sunroof motor
- Sunroof track obstruction
- Switch failure
- Wiring damage in headliner
- Sunroof off track
Diagnostic steps
- Check sunroof fuse
- Test sunroof switch
- Apply direct power to motor
- Inspect sunroof tracks for debris
- Check if panel is off track
Repair notes
Replace sunroof motor or clear track obstruction. Re-initialize sunroof if it has lost calibration.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open