P0700moderate severityPowertrain
Transmission Control System (MIL Request)
on 2011-2023 Chrysler 300 3.6L V6 · RWD
What this code means
The Transmission Control Module (TCM) has requested the PCM to turn on the Check Engine Light due to a transmission fault. There will be additional transmission-specific codes stored.
Symptoms
- Check Engine Light
- Possible shift problems
- May be in limp mode
Common causes
- Various transmission issues - check for additional codes
- TCM detected a fault
- Wiring issue between TCM and PCM
Diagnostic steps
- Read ALL codes including transmission-specific codes
- Check transmission fluid level and condition
- Address other transmission codes first
Repair notes
This is an informational code. Look for other P07xx and P08xx codes that explain the actual problem.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1