Back to 1956 Chrysler Imperial
Help
1956 CHRYSLER IMPERIAL
354 cu in (5.8L) FirePower Hemi V8•RWD•AUTOMATIC•gas
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor443Torque137Fluid8DTC0Battery1Maintenance0Recalls0
Fluid · Engine Oil

Engine Oil

for 1956 Chrysler Imperial 354 cu in (5.8L) FirePower Hemi V8 · RWD
Fluid Type
10W-30 or 20W-50
Spec: API SB or higher (modern SN/SP acceptable)
Capacity
5qt
4.73 L
Drain & Refill
5 qt
4.73 L
Change Interval
2,000 mi
3,218 km

Notes

331 Hemi V8. With filter. Modern oils with ZDDP additive recommended for flat tappet cam protection

Buy on Amazon
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other fluid systems on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 1956 Chrysler Imperial repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Chrysler Imperial — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →