P1115moderate severityPowertrain

General Engine Performance

on 2008 Dodge Avenger 3.5L V6 · FWD

What this code means

The PCM has detected a general engine performance deviation from expected parameters. The engine is not performing within normal operational thresholds for power output, fuel consumption, or emissions.

Symptoms

  • Check Engine Light
  • Reduced engine performance
  • Poor acceleration
  • Rough running
  • Increased fuel consumption

Common causes

  • Multiple minor faults combining to affect performance
  • Worn spark plugs or ignition components
  • Partially clogged fuel injectors
  • Intake or exhaust restriction
  • Low compression in one or more cylinders

Diagnostic steps

  1. Run full diagnostic scan for companion codes
  2. Perform relative compression test
  3. Check fuel injector balance test
  4. Inspect spark plugs and ignition components
  5. Check intake and exhaust for restrictions

Repair notes

Address any companion codes first; this code typically resolves once the underlying performance issue is corrected.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2008 Dodge Avenger repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Avenger — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →