Free API
🌍 International coverage, work in progress. This European-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2011 DODGE CALIBER

1.8L I4•FWD•AUTOMATIC•gas
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Caliber →

Factory-verified torque specsnone yet for this vehicle

No torque value on this vehicle has been checked by hand yet. The full list below is estimated.

Codes, recalls, maintenance

Full specs
5-Year Cost of Ownership
$25,211 maintenance + known platform issues
~$5,042/yr · 420¢/mile equivalent · $6,105 maintenance + $5,906 expected platform issues
Compare this engine
vs
2.0L I4
vs
2.4L I4

Common Problems & Known Issues

The 2011 Dodge Caliber is a compact crossover built on Chrysler's cost-cutting PM/MK platform, notorious for CVT transmission failures and underwhelming 2.0L/2.4L World Engine reliability. Budget-oriented engineering shows in premature wear across drivetrain and electrical systems.

CVT Transmission Failure (JATCO JF011E)

Common · high severity
Typical onset: 60,000-100,000 mi
Symptoms: Shuddering or hesitation during acceleration, especially from stop, Transmission overheating warnings on dashboard, Whining or grinding noises during driving, Complete loss of forward gears, limp mode
Fix: CVT rebuilds rarely hold—most shops recommend replacement with remanufactured unit. Includes fluid flush, cooler lines inspection. 8-12 labor hours for R&R. Oil cooler failure (common) accelerates CVT death—always replace cooler with transmission.
Estimated cost: $3,200-5,500

2.0L/2.4L World Engine Piston Ring/Bearing Failure

Occasional · high severity
Typical onset: 80,000-140,000 mi
Symptoms: Excessive oil consumption (quart every 500-1,000 miles), Blue smoke from exhaust on startup or acceleration, Rod knock or bottom-end rattle at idle, Low oil pressure warning, especially when warm
Fix: World Engine's soft piston rings and oil control issues lead to catastrophic wear. Rod bearings fail when oil consumption goes unnoticed. Repair requires short block replacement or full engine rebuild—16-22 hours labor. Used engines often same mileage/condition, so rebuild preferred if block salvageable.
Estimated cost: $4,500-7,000

Transmission and Engine Mount Failures

Common · medium severity
Typical onset: 50,000-90,000 mi
Symptoms: Excessive vibration at idle, especially in Drive, Clunking when shifting from Park to Drive/Reverse, Engine 'rocking' visibly during acceleration or braking, Increased cabin noise and harshness
Fix: Chrysler used weak hydraulic mounts that collapse prematurely. Front torque mount and transmission mount fail first. Replace all three engine mounts as a set to avoid comeback—2.5-4 hours labor. OEM quality superior to aftermarket on this platform.
Estimated cost: $450-750

Fuel Filter/Pump Module Clogging

Occasional · medium severity
Typical onset: 70,000-110,000 mi
Symptoms: Hard starting, especially after sitting overnight, Stumbling or hesitation under load/acceleration, Check engine light with lean codes (P0171/P0174), Stalling at idle after extended highway driving
Fix: In-tank fuel filter (part of pump module) gets debris buildup from corrosion in steel tanks. No serviceable filter—requires full pump module replacement. Tank drop and module swap: 2.5-3.5 hours. Use OEM Mopar module; aftermarket pumps fail quickly.
Estimated cost: $550-850

Clock Spring Failure (Steering Column)

Occasional · medium severity
Typical onset: 60,000-100,000 mi
Symptoms: Airbag warning light illuminated, Horn stops working or works intermittently, Cruise control buttons non-responsive, Steering wheel controls for radio/phone dead
Fix: Clock spring ribbon cable breaks inside steering column, cutting circuit to airbag and controls. Covered by NHTSA recall 14V-053 but many owners unaware. DIY-able with airbag precautions—1.5-2 hours labor. Must use OEM part and clear airbag codes properly.
Estimated cost: $250-450

Alternator Failure and Wiring Corrosion

Common · medium severity
Typical onset: 70,000-120,000 mi
Symptoms: Battery light on, voltage fluctuating (12-16V swings), Dimming lights at idle, brightening with RPM, Electrical accessories cutting out intermittently, Dead battery after short trips
Fix: Alternators fail early, but poor grounds and corroded harness connectors compound diagnosis. Clean all ground straps on block/chassis before replacing alternator. Alternator R&R: 1.5-2 hours on 2.0L/2.4L. Test battery and connections—weak battery kills new alternators.
Estimated cost: $350-600
Owner tips
  • CVT fluid must be changed every 30,000 miles with Mopar CVTF+4—generic fluid destroys these transmissions
  • Check oil every fill-up on 2.0L/2.4L engines; top off before it drops below 1 quart low to prevent bearing damage
  • Verify clock spring recall 14V-053 completion before purchase—airbag may not deploy if failed
  • Avoid aftermarket fuel pumps and electrical parts—quality is abysmal; spend extra for OEM Mopar on high-failure items
Hard pass unless under $3,000 and you're handy—CVT and engine longevity issues make this a money pit after 80k miles.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API key: 10 requests/day, 100/month, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, built by the same team.
See what's included →