Free API
C140Dhigh severityChassis

Right Rear Wheel Speed Sensor Circuit

on 2012 Dodge Caliber 2.4L I4 · FWD

What this code means

The ABS module detected a circuit fault in the right rear wheel speed sensor. Similar to OBD P-code C0040. This disables ABS and stability functions on that wheel.

Symptoms

  • ABS warning light on
  • Traction control disabled
  • Speedometer may drop out

Common causes

  • Damaged sensor wiring/connector
  • Failed wheel speed sensor
  • Corroded connector pins
  • Faulty ABS module

Diagnostic steps

  1. Scan ABS module for codes
  2. Check sensor connector and harness
  3. Measure sensor resistance and air gap
  4. Compare live data across all wheels

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2012 Dodge Caliber repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Caliber — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →