P1299moderate severityPowertrain
Vacuum Leak Found IAC At Max
on 2000 Dodge Caravan 3.0L V6 · FWD
What this code means
The PCM has determined that the idle air control motor is at its maximum closed position but the engine idle is still too high. This strongly indicates a vacuum leak is allowing unmetered air into the engine.
Symptoms
- Check Engine Light
- High idle speed
- Idle does not come down
- Rough idle
- Hissing sound from engine bay
Common causes
- Vacuum hose cracked or disconnected
- Intake manifold gasket leak
- Throttle body gasket leak
- Brake booster vacuum leak
- PCV valve or hose leak
Diagnostic steps
- Perform smoke test on intake system to locate vacuum leak
- Inspect all vacuum hoses for cracks or disconnections
- Check intake manifold gasket area with carb cleaner spray
- Test brake booster vacuum hose
- Inspect PCV system
Repair notes
Locate and repair the vacuum leak that is causing the high idle condition.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1