U0202moderate severityNetwork
Lost Communication with Wiper Control Module
on 2020 Dodge Challenger 6.2L V8 Hellcat (707hp) · RWD
What this code means
Cannot communicate with the windshield wiper control module.
Symptoms
- Wipers not working
- Wiper speed not changing
- Intermittent wiper mode not working
- Rear wiper inoperative
Common causes
- Wiper module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Wiper motor failure
Diagnostic steps
- Check wiper module fuse
- Test power and ground
- Check CAN wiring
- Test wiper motor directly
- Inspect wiper switch
Repair notes
Check fuses and wiper motor. Module may be integrated into wiper motor assembly.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus