Free API
P0367moderate severityPowertrain

Camshaft Position Sensor B Circuit Low (Bank 1)

on 2006 Dodge Charger 3.5L V6 · RWD

What this code means

The PCM detected a low voltage signal in the camshaft position sensor B circuit on bank 1. This often indicates a short to ground or an open in the circuit.

Symptoms

  • Hard starting
  • Stalling
  • Check engine light on

Common causes

  • Short to ground in wiring
  • Faulty camshaft position sensor
  • Corroded or loose connector
  • Faulty PCM

Diagnostic steps

  1. Scan and record freeze frame data
  2. Check sensor signal voltage
  3. Inspect wiring for shorts to ground
  4. Test sensor resistance and replace if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2006 Dodge Charger repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Charger — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →