Free API
P0680low severityPowertrain

Cylinder 10 Glow Plug Circuit

on 2007 Dodge Charger 3.5L V6 · RWD

What this code means

The PCM detected a fault in the glow plug control circuit for cylinder 10. Faulty glow plugs lead to hard starting and rough operation when cold.

Symptoms

  • Hard cold starting
  • Rough idle when cold
  • Warning lamp on

Common causes

  • Faulty glow plug cylinder 10
  • Corroded wiring
  • Bad glow plug control module
  • Blown fuse or relay

Diagnostic steps

  1. Scan for glow plug codes
  2. Measure cylinder 10 glow plug resistance
  3. Check wiring and connectors
  4. Test control module voltage

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2007 Dodge Charger repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Charger — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →