U0199moderate severityNetwork
Lost Communication with Door Control Module A
on 2013 Dodge Dart 2.4L I4 Tigershark · FWD
What this code means
Cannot communicate with door control module A (usually driver door).
Symptoms
- Power windows not working
- Door locks inoperative from that door
- Mirror control not working
Common causes
- Module failure
- Wiring in door jamb broken
- Water damage in door
- Connector issue
Diagnostic steps
- Inspect door jamb wiring
- Check for water in door
- Test module power
- Check connector
Repair notes
Inspect door jamb wiring harness - flexing breaks wires over time.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus