C0235moderate severityChassis
Power Steering Fluid Temperature High
on 2011 Dodge Durango 3.6L V6 Pentastar · 4WD
What this code means
The power steering fluid temperature has exceeded the safe operating limit.
Symptoms
- Power steering warning light
- Steering assist may be reduced
- Fluid smell or smoke from engine bay
- Steering heavy when hot
Common causes
- Extended hard steering maneuvers
- Power steering cooler blocked or damaged
- Restricted fluid flow
- Undersized system for operating conditions
- Faulty temperature sensor
Diagnostic steps
- Check power steering fluid condition and color
- Inspect power steering cooler for blockage
- Verify fluid is correct specification
- Check for restricted hoses
- Test temperature sensor if equipped
Repair notes
Allow system to cool. Flush and replace fluid. Clean or replace power steering cooler.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic