P1391high severityPowertrain
Intermittent Loss Of CKP Or CMP Sensor Signal
on 1998 Dodge Intrepid 3.5L V6 · FWD
What this code means
The PCM has detected an intermittent loss of the crankshaft position sensor or camshaft position sensor signal. The signal drops out momentarily during engine operation, which can cause misfires and stalling.
Symptoms
- Check Engine Light
- Intermittent stalling
- Engine misfires
- Rough idle
- Difficulty starting
Common causes
- Faulty CKP or CMP sensor
- Damaged sensor wiring or connector
- Corroded sensor connector pins
- Excessive sensor air gap
- Damaged reluctor ring or tone wheel
Diagnostic steps
- Monitor CKP and CMP sensor signals on scan tool for dropouts
- Wiggle test sensor wiring while engine is running
- Inspect sensor connectors for corrosion or looseness
- Measure sensor air gap
- Inspect reluctor ring for missing or damaged teeth
Repair notes
Replace the sensor that is dropping signal; inspect wiring and connectors for intermittent contact.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1