B2101low severityBody
Daytime Running Light Module Circuit
on 2007 Dodge Nitro 4.0L V6 · 4WD
What this code means
Malfunction in the daytime running light (DRL) module or circuit.
Symptoms
- DRLs not illuminating
- DRLs always on even with headlights on
- DRL brightness incorrect
- DRL warning message on display
Common causes
- Faulty DRL module
- Burnt out DRL bulb/LED
- Wiring issue
- BCM DRL output fault
- Light sensor input error
Diagnostic steps
- Check DRL bulbs/LEDs
- Test DRL module power and ground
- Inspect wiring
- Scan BCM for DRL codes
- Test light sensor input
Repair notes
Replace DRL bulbs/LEDs or DRL control module.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open