U0101high severityNetwork

Lost Communication with TCM

on 2010 Dodge Nitro 3.7L V6 · 4WD

What this code means

Cannot communicate with the Transmission Control Module.

Symptoms

  • Check Engine Light
  • Transmission in limp mode
  • Harsh shifting or no shifting
  • Trans warning light

Common causes

  • TCM power/ground failure
  • CAN bus wiring to TCM
  • TCM failure
  • Fuse blown

Diagnostic steps

  1. Check TCM fuses
  2. Test power and ground at TCM
  3. Check CAN bus wiring
  4. Try direct communication with TCM

Repair notes

Check fuses and power supply. Verify CAN bus.

Other Network codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2010 Dodge Nitro repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Nitro — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →