P0151moderate severityPowertrain
O2 Sensor Circuit Low Voltage Bank 2 Sensor 1
on 2010 Dodge Nitro 4.0L V6 · 4WD
What this code means
The upstream O2 sensor voltage on Bank 2 is staying low.
Symptoms
- Check Engine Light
- Lean running Bank 2
- Rough idle
Common causes
- Vacuum leak Bank 2
- Faulty sensor
- Exhaust leak
- Low fuel pressure
Diagnostic steps
- Check vacuum leaks Bank 2
- Monitor sensor voltage
- Test fuel pressure
Repair notes
Fix leak or replace sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1