2007 DODGE RAIDER

4.7L V8FWDAUTOMATICgas
5-Year Cost of Ownership
$44,057 maintenance + known platform issues
~$8,811/yr · 730¢/mile equivalent · $37,703 maintenance + $5,654 expected platform issues
Compare this engine
vs
3.0L V6
Common Problems & Known Issues

The 2007 Dodge Raider is a rebadged Mitsubishi Montero Sport sold exclusively in Mexico and some Latin American markets. Built on Mitsubishi's aging platform with a 4.7L V8, it shares the Montero's robust truck-based bones but suffers from transmission fragility and electronics gremlins typical of late-2000s Chrysler-Mitsubishi partnerships.

Automatic Transmission Failure (45RFE/545RFE)

Common · high severity
Typical onset: 90,000-140,000 mi
Symptoms: Harsh 2-3 or 3-4 shifts with shuddering under light throttle, Slipping in overdrive, especially when towing or loaded, Check engine light with P0750, P0731, or solenoid pack codes, Delayed engagement from Park to Drive after sitting overnight
Fix: The 45RFE/545RFE transmission is undersized for the 4.7L V8's torque, particularly in hot climates. Solenoid pack failure is common (8-10 hours R&R), but by the time codes appear, clutch pack damage often requires full rebuild. Expect 18-22 hours labor for rebuild, add 4-6 hours if torque converter is also cooked. Preventive fluid changes every 30k mi can delay but not prevent failure.
Estimated cost: $2,800-4,500

Transmission Output Shaft Bearing Noise

Common · medium severity
Typical onset: 70,000-110,000 mi
Symptoms: Grinding or growling noise in all gears that increases with speed, Noise present in neutral with clutch out (manual) or in drive coasting, Metal shavings in transmission fluid during service, Vibration felt through shifter at highway speeds
Fix: Output shaft bearing wears prematurely due to inadequate lubrication design and heat buildup. Requires transmission removal to replace bearing and often the output shaft itself if splines are damaged. 14-18 hours labor including fluid refill and alignment check. Catch it early before bearing disintegrates and contaminates the entire transmission.
Estimated cost: $1,800-2,600

Transmission Oil Cooler Line Failure

Common · high severity
Typical onset: 60,000-100,000 mi
Symptoms: Trans fluid puddle under front of vehicle near radiator, Pink or red fluid mixed with coolant in overflow tank, Transmission overheating warning or erratic shifting after coolant contamination, Milky brown fluid on transmission dipstick
Fix: Steel cooler lines rust through at mounting brackets and where they enter the radiator-mounted cooler. If coolant mixes with ATF, immediate flush of both systems required plus radiator replacement. Lines alone are 3-4 hours; if internal radiator cooler fails, add radiator R&R (6-8 hours total) plus transmission fluid flush cycles. Many shops install external aftermarket cooler to prevent recurrence.
Estimated cost: $800-2,200

Transmission Control Module Failure

Occasional · high severity
Typical onset: 80,000-130,000 mi
Symptoms: Random no-start with no crank, shifter won't move out of Park, Limp mode with transmission stuck in 2nd or 3rd gear, Multiple solenoid codes (P0750, P0755, P0760) appearing simultaneously, Speedometer drops to zero intermittently while driving
Fix: TCM mounted on transmission valve body fails from heat cycling and vibration. Requires transmission pan removal, valve body drop, and TCM replacement with VIN programming. 4-6 hours labor. Some units can be repaired by specialists for half the cost of new, but core exchange requires 2-3 week turnaround. Common to also replace output speed sensor during this job as they fail concurrently.
Estimated cost: $900-1,600

Fuel Filter Clogging (High-Sulfur Fuel Markets)

Occasional · medium severity
Symptoms: Rough idle and stumbling acceleration after refueling, Loss of power on highway grades, won't maintain speed above 65 mph, Engine stalling at idle after extended driving, P0171, P0174 lean codes with no vacuum leaks found
Fix: In markets with questionable fuel quality, the in-tank filter clogs with sediment and water contamination. Tank must be dropped for filter replacement as it's integrated with the fuel pump assembly. 3-4 hours labor. Many techs replace the entire pump module ($400-600 part) rather than risk old pump failure after disturbing it. Use premium fuel and add fuel system cleaner every 5k mi in high-sulfur regions.
Estimated cost: $600-1,000

Neutral Safety Switch Intermittent Failure

Occasional · medium severity
Typical onset: 70,000-120,000 mi
Symptoms: No crank in Park, but starts in Neutral or vice versa, Backup lights don't work or stay on in all gears, Cruise control won't engage or disengages randomly, P0705, P0708 transmission range sensor codes
Fix: Range sensor (neutral safety switch) on driver's side of transmission wears from heat and contamination. Requires shifter linkage adjustment after replacement to ensure proper gate alignment. 2-3 hours labor including alignment procedure and test drive through all gear positions. Often replaced during transmission service as preventive measure.
Estimated cost: $350-550
Owner tips
  • Change transmission fluid every 30,000 mi with OEM Mopar ATF+4 spec only—aftermarket fluids accelerate clutch pack wear
  • Install external transmission cooler if towing or operating in temperatures above 90°F regularly
  • Inspect transmission cooler lines and frame-mounted rubber isolators every oil change for rust and cracking
  • If buying used, pull transmission dipstick and smell for burnt odor—if present, walk away regardless of claimed service history
  • Keep fuel tank above 1/4 full in humid climates to minimize water condensation in tank
Buy only if transmission has been recently rebuilt with receipts and external cooler added—otherwise budget $3-4k for inevitable transmission work within first year of ownership.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
593 jobs across 17 categories
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →