P1282high severityPowertrain
Fuel Pump Relay Control Circuit
on 2002 Dodge Ram Van 5.9L V8 · RWD
What this code means
The PCM has detected a malfunction in the fuel pump relay control circuit. The relay is not responding correctly to PCM commands, which can prevent the fuel pump from operating or cause it to run continuously.
Symptoms
- Check Engine Light
- Engine cranks but will not start
- Intermittent stalling
- Fuel pump runs continuously with key on
- No fuel pump prime on key-on
Common causes
- Faulty fuel pump relay
- Wiring open or short in relay control circuit
- Corroded relay socket
- PCM driver circuit failure
- Blown fuel pump fuse
Diagnostic steps
- Swap fuel pump relay with known good relay of same type
- Check for power and ground at relay socket
- Test PCM relay control output
- Inspect relay socket for corrosion or burnt contacts
- Check fuel pump fuse
Repair notes
Replace the fuel pump relay and inspect the relay socket for corrosion or heat damage.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1