B0261low severityBody
Convertible Top Position Sensor
on 2005 Dodge Stratus 2.7L V6 · FWD
What this code means
The convertible top position sensor is not reporting valid data, preventing automatic top operation.
Symptoms
- Top auto-open/close not working
- Top stops at random positions
- Must manually assist top movement
- Control module error
Common causes
- Faulty position sensor
- Sensor wiring damage
- Sensor misaligned
- Control module needs recalibration
Diagnostic steps
- Check position sensor output
- Inspect sensor alignment
- Test wiring
- Attempt recalibration procedure
Repair notes
Replace or realign position sensor. Recalibrate top control module.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open