B0012critical severityBody
Driver Side Airbag Deployment Circuit Short to Ground
on 2005 Dodge Viper 8.3L V10 · RWD
What this code means
A short to ground was detected in the driver side airbag deployment circuit. This could cause unintended airbag deployment.
Symptoms
- Airbag warning light on
- SRS fault stored
- Possible unintended deployment risk
Common causes
- Damaged wiring insulation
- Water intrusion into connector
- Pinched wire in seat mechanism
- Faulty airbag module
Diagnostic steps
- Disconnect battery and wait 10 minutes
- Inspect wiring for insulation damage
- Check for water in connectors
- Measure circuit isolation to ground
Repair notes
Repair shorted wiring immediately. This is a safety concern as it could cause unintended deployment.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open