B2204high severityBody
PCM VIN Not Programmed Or Mismatch
on 2005 Dodge Viper 8.3L V10 · RWD
What this code means
The stored VIN in the PCM is missing or does not match the SKIM/vehicle, blocking immobilizer authentication. No direct OBD P-code equivalent exists for this body code.
Symptoms
- No-start condition
- Security light on
- Modules fail to communicate
Common causes
- PCM not programmed with VIN
- Replaced PCM
- VIN mismatch after swap
- Software corruption
Diagnostic steps
- Scan VIN in PCM and SKIM
- Compare to vehicle VIN
- Reprogram PCM VIN
- Clear codes and retest
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open