Free API
P0369moderate severityPowertrain

Camshaft Position Sensor B Circuit Intermittent (Bank 1)

on 2005 Dodge Viper 8.3L V10 · RWD

What this code means

The PCM detected an intermittent or erratic signal from the bank 1 camshaft position sensor B. This can cause momentary timing errors and drivability issues.

Symptoms

  • Intermittent check engine light
  • Occasional stalling or hesitation
  • Erratic engine performance

Common causes

  • Loose or corroded connector
  • Damaged sensor wiring
  • Faulty camshaft position sensor
  • Reluctor wheel damage

Diagnostic steps

  1. Scan for stored and pending codes
  2. Wiggle-test wiring while monitoring signal
  3. Inspect connector pins and grounds
  4. Replace camshaft position sensor if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2005 Dodge Viper repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Viper — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →