U0003high severityNetwork
High Speed CAN Communication Bus (+) Open
on 2005 Dodge Viper 8.3L V10 · RWD
What this code means
The CAN High wire is open, disrupting high-speed bus communication. CAN H carries the dominant high signal.
Symptoms
- Multiple modules offline
- Warning lights illuminated
- Systems inoperative
- No scan tool communication on some modules
Common causes
- Broken CAN H wire
- Corroded CAN H terminal
- Damaged CAN bus connector
- Wiring harness damage
Diagnostic steps
- Measure voltage on CAN H (should be ~2.5V idle, ~3.5V dominant)
- Check continuity of CAN H wire
- Inspect CAN bus connectors
- Locate break using voltage drop test
Repair notes
Locate and repair the open in the CAN H wire. Check all splice points.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus
U0011
Control Module Communication Bus A Low