B0011critical severityBody
Driver Side Airbag Deployment Circuit Open
on 2008 Dodge Viper 8.4L V10 · RWD
What this code means
An open circuit was detected in the driver side airbag deployment loop. The airbag will not deploy in a side impact with this fault.
Symptoms
- Airbag warning light on
- SRS fault stored
- Driver side airbag inoperative
Common causes
- Disconnected airbag connector
- Broken wire in seat or door
- Faulty airbag squib
- Aftermarket seat cover interfering with connector
Diagnostic steps
- Check driver side airbag connector
- Inspect wiring from seat to B-pillar
- Measure deployment loop resistance
- Remove aftermarket seat covers and recheck
Repair notes
Reconnect or repair the open circuit. Check for aftermarket accessories that may have dislodged the connector.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0012
Driver Side Airbag Deployment Circuit Short to Ground