Free API
Help
2008 DODGE VIPER
8.4L V10•RWD•gas
🏆Sponsored by Open Labor Project
Repairs484Labor485Torque152Fluid8DTC1869Battery1Maintenance0Recalls0
P0300critical severityPowertrain

Random/Multiple Cylinder Misfire Detected

on 2008 Dodge Viper 8.4L V10 · RWD

What this code means

The PCM has detected misfires occurring in multiple cylinders randomly. This is different from a single-cylinder misfire and often points to a system-wide issue.

Symptoms

  • Check Engine Light (flashing if severe)
  • Rough idle
  • Vibration
  • Loss of power
  • Hesitation
  • Poor fuel economy
  • Possible catalyst damage

Common causes

  • Vacuum leak
  • Low fuel pressure
  • Faulty spark plugs (all)
  • Ignition coil pack failure
  • EGR valve stuck open
  • Low compression (multiple cylinders)
  • Wiring harness issue
  • MAF sensor problem

Diagnostic steps

  1. Check for vacuum leaks (smoke test)
  2. Test fuel pressure
  3. Inspect spark plugs
  4. Test ignition coils
  5. Check fuel injectors
  6. Test compression
  7. Check MAF sensor
  8. Monitor fuel trim values

Repair notes

Start with spark plugs and vacuum leaks. Flashing CEL means severe misfire - stop driving to protect catalytic converter.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITE
Shop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
🔓 LIBERATED FOREVER
The 2008 Dodge Viper 8.4L V10 repair data is free for every DIYer and shop on earth, permanently, because Open Labor Project paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Open.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →