P0410moderate severityPowertrain
Secondary Air Injection System
on 2008 Dodge Viper 8.4L V10 · RWD
What this code means
Malfunction in the secondary air injection (AIR) system. This system pumps fresh air into the exhaust to reduce cold-start emissions.
Symptoms
- Check Engine Light
- Failed emissions test
- Unusual noise from AIR pump on startup
Common causes
- Faulty AIR pump
- Check valve failure
- AIR pump relay failure
- Hose deterioration
- Blocked passages
Diagnostic steps
- Test AIR pump operation
- Check AIR pump relay
- Inspect check valves
- Check for blocked passages
- Verify air is flowing into exhaust manifold
Repair notes
Replace AIR pump or check valve. This system only runs briefly during cold start on most vehicles.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1