B0089high severityBody
SRS Control Module Voltage High
on 2000 Ford Contour 2.5L V6 · FWD
What this code means
The SRS control module is receiving higher than specified operating voltage.
Symptoms
- Airbag warning light on
- SRS codes set
- Electronic component stress
Common causes
- Overcharging alternator
- Faulty voltage regulator
- Poor ground causing voltage offset
- Jump start damage
Diagnostic steps
- Check charging system voltage
- Test alternator output regulation
- Inspect ground connections
- Measure voltage at ACM
Repair notes
Repair charging system. Replace alternator or voltage regulator if overcharging.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open
B0012
Driver Side Airbag Deployment Circuit Short to Ground
B0013
Driver Side Airbag Deployment Circuit Short to Battery