P0687high severityPowertrain
ECM/PCM Power Relay Control Circuit High
on 2022 Ford E-Transit Electric Motor · RWD
What this code means
The PCM detects a high voltage condition in the ECM/PCM power relay control circuit. This may indicate a short to voltage or a failed relay.
Symptoms
- Intermittent stalling
- No-start condition
- Power relay stays energized
Common causes
- Short to voltage in control circuit
- Faulty power relay
- Wiring insulation damage
- PCM fault
Diagnostic steps
- Check control circuit for high voltage
- Inspect wiring for short to power
- Test power relay operation
- Verify PCM output signals
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0026
Intake Valve Control Solenoid Circuit Range/Performance Bank 1
P0027
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 1
P0028
Intake Valve Control Solenoid Circuit Range/Performance Bank 2
P0029
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 2
P0033
Turbocharger/Supercharger Bypass Valve Control Circuit