U0230moderate severityNetwork
Lost Communication with Adaptive Speed Control Module
on 2015 Ford Edge 3.5L V6 · AWD
What this code means
Cannot communicate with the adaptive cruise control or radar-based speed control module.
Symptoms
- Adaptive cruise control disabled
- Radar sensor warning
- ACC not available message
- Forward distance not displayed
Common causes
- ACC module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Radar sensor blocked
- Front fascia damage near sensor
Diagnostic steps
- Check ACC module fuse
- Test power and ground
- Check CAN wiring
- Clean radar sensor area
- Check for front bumper damage near sensor
- Inspect radar sensor alignment
Repair notes
Check fuses. Radar sensor behind front grille can be blocked by ice, mud, or bumper damage.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus