Free API
🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2025 FORD EDGE

2.0L I4 EcoBoost•AWD•AUTOMATIC•gas•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Edge →

Control Modules — 2025 Ford Edge

Every control module on the 2021-2026 Ford Edge — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)4.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Integrated with valve body inside transmission (8F35 8-speed automatic)
🔧 Ford FDRS + J2534
⚠️ Transmission pan removal required. Security gateway authentication, adaptive learning reset, and PMI required.
Power Steering Control Module (PSCM)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Integrated with electric power steering column assembly, below instrument panel
🔧 Ford FDRS + J2534
⚠️ Steering column removal required. Steering angle sensor calibration required after replacement.
Body Control Module (BCM)2.0 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Behind center stack, above transmission tunnel
🔧 Ford FDRS + J2534
⚠️ Security gateway authentication required. As-built configuration critical. Controls lighting, wipers, locks, windows, PATS.
Gateway Module (GWM)1.8 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Behind center stack, above transmission tunnel near BCM
🔧 Ford FDRS + J2534
⚠️ Central network hub and security gateway. As-built data critical. Controls security authentication for other modules.
Heating Ventilation Air Conditioning Module (HVAC)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind center stack, integrated with climate control head unit
🔧 Ford FDRS or Autel
⚠️ Automatic climate control. Actuator calibration required after replacement.
Transfer Case Control Module (TCCM)1.5 hr R&Raftermarket tool +0.3 hrAWD models▸ programming details
📍 Mounted on transfer case, passenger side of transmission tunnel
🔧 Ford FDRS or Autel
⚠️ Controls PTU (Power Transfer Unit) clutch engagement. Configuration required for drive mode settings.
Anti-Lock Brake System Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine compartment, driver side inner fender near master cylinder
🔧 Ford FDRS + J2534
⚠️ Integrated hydraulic control unit. Brake bleeding required. PMI and configuration required.
Image Processing Module A (IPMA)1.5 hr R&Rdealer / factory tool +0.8 hrwith lane keeping assist or adaptive cruise control▸ programming details
📍 Behind rearview mirror, integrated with windshield camera assembly
🔧 Ford FDRS + J2534
⚠️ Forward-facing camera. Windshield calibration required after replacement or windshield replacement. Static or dynamic calibration procedure.
Accessory Protocol Interface Module (APIM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center touchscreen display in center stack
🔧 Ford FDRS + J2534
⚠️ SYNC 3 or SYNC 4 system depending on year. As-built configuration required. Software updates via USB or FDRS.
Seat Control Module (SCM)1.2 hr R&Raftermarket tool +0.2 hrwith power driver seat with memory▸ programming details
📍 Under driver seat, integrated with seat frame
🔧 Ford FDRS or Autel
⚠️ Controls power seat adjustments and memory positions. Requires seat position relearn. Standard on Titanium and ST.
Powertrain Control Module (PCM)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine compartment, driver side firewall mounted on bracket
🔧 Ford FDRS + J2534
⚠️ Security gateway authentication required. VIN-specific calibration and PMI. PATS security link mandatory.
Door Zone Module (DZM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Inside each front door, behind door panel near latch
🔧 Ford FDRS or Autel
⚠️ One per front door. Controls windows, locks, mirrors, memory seats. Window auto-up/down relearn required.
Radar Module (RADAR)1.2 hr R&Rdealer / factory tool +0.8 hrwith adaptive cruise control or pre-collision assist▸ programming details
📍 Front bumper, center behind grille emblem
🔧 Ford FDRS + J2534
⚠️ Forward radar. Aim calibration required after replacement. Static calibration procedure with targets.
Restraints Control Module (RCM)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Center console, below center stack behind trim panel
🔧 Ford FDRS + J2534
⚠️ Battery disconnect and 2-minute wait mandatory. Security gateway authentication. Crash data retrieval possible before replacement.
Front Lighting Control Module (FLCM)1.0 hr R&Raftermarket tool +0.3 hrwith LED or adaptive headlights▸ programming details
📍 Engine compartment, behind driver side headlight assembly
🔧 Ford FDRS or Autel
⚠️ Controls adaptive lighting and auto high beam. Configuration required for beam pattern.
Telematics Control Unit (TCU)1.0 hr R&Rdealer / factory tool +0.5 hrwith FordPass Connect▸ programming details
📍 Behind center stack, near APIM
🔧 Ford FDRS + J2534
⚠️ 4G LTE modem. Subscription activation required after replacement.
Liftgate Module (LGM)1.0 hr R&Raftermarket tool +0.3 hrwith power liftgate▸ programming details
📍 Rear liftgate, driver side behind interior trim panel
🔧 Ford FDRS or Autel
⚠️ Height calibration required after replacement. Hands-free operation on equipped models.
Digital Audio Control Module C (DACMC)1.0 hr R&Raftermarket tool +0.3 hrwith premium B&O audio system▸ programming details
📍 Behind rear cargo trim panel, driver side
🔧 Ford FDRS or Autel
⚠️ Premium audio amplifier. Configuration required for speaker setup.
Instrument Panel Cluster (IPC)0.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Instrument panel, behind gauge cluster trim
🔧 Ford FDRS + J2534
⚠️ Security gateway authentication required. Mileage programming and as-built configuration mandatory.
Fuel Pump Control Module (FPCM)0.8 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Rear cargo area, driver side behind trim panel above fuel tank
🔧 Ford FDRS or Autel
⚠️ Controls fuel pump speed. Self-learns after installation; scan tool can expedite.
Parking Aid Module (PAM)0.8 hr R&Raftermarket tool +0.3 hrwith front/rear parking sensors▸ programming details
📍 Rear cargo area, passenger side behind trim panel
🔧 Ford FDRS or Autel
⚠️ Sensor calibration required after replacement.
Suspension Control Module (SCM)0.8 hr R&Rdealer / factory tool +0.5 hrST models with sport-tuned suspension▸ programming details
📍 Rear cargo area, passenger side quarter panel
🔧 Ford FDRS + J2534
⚠️ Controls continuously controlled damping on ST models. Requires ride height sensor calibration.
Trailer Brake Control Module (TBC)0.8 hr R&Raftermarket tool +0.2 hrwith factory trailer brake controller▸ programming details
📍 Behind driver side kick panel, near fuse box
🔧 Ford FDRS or Autel
⚠️ Integrated trailer brake controller. Calibration via IPC menu after installation.
Passive Anti-Theft System Module (PATS)security gateway +0.8 hr▸ programming details
📍 Integrated within BCM
🔧 Ford FDRS + J2534
⚠️ Function integrated in BCM. Security gateway authentication required. Key programming requires all keys present.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →