Back to 1997 Ford Explorer
Help
1997 FORD EXPLORER
5.0L V8•AWD•AUTOMATIC•gas
12 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor547Torque3672Fluid9DTC683Battery1Maintenance0Recalls12
P1703moderate severityPowertrain

Brake Switch Out of Self-Test Range

on 1997 Ford Explorer 5.0L V8 · AWD

What this code means

The brake switch signal is not within the expected range during the KOER self-test. The brake switch signal is used by the transmission for torque converter clutch disengagement and cruise control operation.

Symptoms

  • Check Engine Light
  • Cruise control inoperative
  • TCC may not disengage when braking
  • Brake lights may not work
  • Shift interlock may not release

Common causes

  • Brake switch out of adjustment
  • Faulty brake switch
  • Brake pedal not pressed during self-test
  • Wiring issue

Diagnostic steps

  1. Press and release brake pedal during KOER self-test
  2. Test brake switch operation (should change state when pedal is pressed)
  3. Check brake light operation
  4. Inspect brake switch wiring

Repair notes

Adjust or replace brake switch. Press brake during self-test.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 1997 Ford Explorer repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Explorer — $99 →
Building an app?
Free API access to all this data — 20 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →