P1703moderate severityPowertrain
Brake Switch Out of Self-Test Range
on 2005 Ford Explorer 4.6L V8 · AWD
What this code means
The brake switch signal is not within the expected range during the KOER self-test. The brake switch signal is used by the transmission for torque converter clutch disengagement and cruise control operation.
Symptoms
- Check Engine Light
- Cruise control inoperative
- TCC may not disengage when braking
- Brake lights may not work
- Shift interlock may not release
Common causes
- Brake switch out of adjustment
- Faulty brake switch
- Brake pedal not pressed during self-test
- Wiring issue
Diagnostic steps
- Press and release brake pedal during KOER self-test
- Test brake switch operation (should change state when pedal is pressed)
- Check brake light operation
- Inspect brake switch wiring
Repair notes
Adjust or replace brake switch. Press brake during self-test.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1