P0400moderate severityPowertrain
Exhaust Gas Recirculation (EGR) Flow
on 2006 Ford Explorer 4.6L V8 · 4WD
What this code means
The EGR system flow is not within expected parameters.
Symptoms
- Check Engine Light
- Rough idle
- Pinging/knocking
- Increased NOx emissions
- Failed emissions test
Common causes
- Clogged EGR passages
- Faulty EGR valve
- EGR valve stuck closed
- Carbon buildup
- Vacuum line issue
Diagnostic steps
- Test EGR valve operation
- Check EGR passages for carbon buildup
- Test vacuum supply to EGR valve
- Monitor EGR position with scan tool
- Inspect EGR tube
Repair notes
Clean EGR valve and passages. Replace EGR valve if stuck or faulty.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1