P1237high severityPowertrain
Fuel Pump Secondary Circuit Malfunction
on 2006 Ford Explorer 4.6L V8 · 4WD
What this code means
The fuel pump secondary circuit has a malfunction. The PCM has detected an issue with the return signal from the FPDM indicating the fuel pump is not operating as commanded.
Symptoms
- Engine cranks but will not start
- Engine stalls
- Intermittent no-start
- Loss of power
Common causes
- Faulty FPDM
- Corroded fuel pump connector
- Failed fuel pump
- Wiring damage
- Blown fuel pump relay
Diagnostic steps
- Check fuel pump relay
- Inspect FPDM and wiring
- Test fuel pump directly with power
- Check fuel pressure at rail
Repair notes
Replace FPDM or fuel pump as needed. Repair corroded wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1