P1250moderate severityPowertrain
PRC Solenoid Circuit Malfunction
on 2006 Ford Explorer 4.6L V8 · 4WD
What this code means
The Pressure Regulator Control solenoid circuit has a malfunction. This solenoid controls fuel pressure in the returnless fuel system used on many Ford vehicles.
Symptoms
- Check Engine Light
- High or low fuel pressure
- Rich or lean running
- Poor performance
Common causes
- Faulty PRC solenoid
- Wiring issue
- Corroded connector
- PCM driver failure
Diagnostic steps
- Test PRC solenoid resistance
- Inspect wiring and connector
- Command solenoid with scan tool
- Check fuel pressure
Repair notes
Replace PRC solenoid if faulty. Repair wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1