P1383moderate severityPowertrain
Variable Cam Timing Over-Retarded (Bank 1)
on 2006 Ford Explorer 4.6L V8 · 4WD
What this code means
The variable camshaft timing system on Bank 1 is over-retarded beyond the PCM commanded position.
Symptoms
- Check Engine Light
- Loss of power
- Poor fuel economy
- Rough idle
Common causes
- Stuck VCT solenoid
- Dirty engine oil
- Worn VCT phaser
- Low oil pressure
- Timing chain wear
Diagnostic steps
- Check oil level and condition
- Test VCT solenoid
- Monitor cam timing on scan tool
- Check oil pressure
Repair notes
Change oil. Replace VCT solenoid or phaser if needed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1