Back to 2006 Ford Explorer
Help
2006 FORD EXPLORER
4.6L V8•4WD•AUTOMATIC•gas
4 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor987Torque6774Fluid18DTC2122Battery2Maintenance0Recalls4
P1705low severityPowertrain

Transmission Range Sensor Not in P/N During KOEO/KOER

on 2006 Ford Explorer 4.6L V8 · 4WD

What this code means

The Transmission Range Sensor indicates the transmission is not in Park or Neutral during the Key On Engine Off or Key On Engine Running self-test. The test requires the vehicle to be in Park or Neutral.

Symptoms

  • Check Engine Light
  • Self-test failure

Common causes

  • Vehicle not in Park or Neutral during test
  • Faulty Transmission Range Sensor
  • TRS out of adjustment
  • Wiring issue

Diagnostic steps

  1. Ensure vehicle is in Park during self-test
  2. Test TRS signal on scan tool
  3. Check TRS adjustment
  4. Inspect TRS wiring

Repair notes

Ensure vehicle is in Park during test. Adjust or replace TRS if faulty.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2006 Ford Explorer repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Explorer — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →