C0241high severityChassis
Active Steering Motor Circuit
on 2010 Ford Explorer 4.6L V8 · 4WD
What this code means
Malfunction in the active steering superposition motor that varies the steering ratio.
Symptoms
- Active steering disabled
- Fixed steering ratio
- Warning light on
- Steering ratio does not change with speed
Common causes
- Active steering motor failure
- Motor wiring damage
- Control module driver failure
- Motor position sensor fault
Diagnostic steps
- Test motor winding resistance
- Check motor connector
- Command motor movement with scan tool
- Monitor motor position feedback
- Inspect wiring for damage
Repair notes
Replace active steering motor assembly or steering gear if motor is integrated.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent