Free API
P0916high severityPowertrain

Gear Shift Position Circuit Low

on 2010 Ford Explorer 4.6L V8 · RWD

What this code means

The gear shift position circuit voltage is lower than normal. This typically indicates a short to ground or a failed sensor in the shift system.

Symptoms

  • No or erratic shifting
  • Transmission warning light
  • Limp mode

Common causes

  • Short to ground in wiring
  • Faulty gear shift position sensor
  • Corroded connector
  • Failed transmission control module

Diagnostic steps

  1. Retrieve trouble codes
  2. Check signal wire for short to ground
  3. Backprobe sensor voltage at connector
  4. Replace sensor if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Ford Explorer repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Explorer — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →