2013 FORD EXPLORER

3.5L V6 EcoBoostAWDAUTOMATICgasturbo
12 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1130moderate severityPowertrain

Lack of HO2S Switch — Adaptive Fuel at Limit (Bank 1)

on 2013 Ford Explorer 3.5L V6 EcoBoost · AWD

What this code means

The upstream heated oxygen sensor on Bank 1 is not switching properly between rich and lean, and the adaptive fuel strategy has reached its correction limit. The PCM can no longer compensate for the condition.

Symptoms

  • Check Engine Light
  • Poor fuel economy
  • Rough idle
  • Hesitation
  • Failed emissions test

Common causes

  • Large vacuum leak
  • Faulty HO2S sensor Bank 1
  • Exhaust leak near sensor
  • Fuel system issue (low pressure, leaking injector)
  • MAF sensor malfunction

Diagnostic steps

  1. Check for vacuum leaks with smoke test
  2. Monitor O2 sensor switching on scan tool
  3. Check fuel pressure
  4. Inspect for exhaust leaks near O2 sensor
  5. Check MAF sensor readings

Repair notes

Repair vacuum leaks. Replace O2 sensor if not switching. Check fuel system.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ford Explorer repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Explorer — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →