Back to 2016 Ford Explorer
Help
2016 FORD EXPLORER
3.5L V6•FWD•AUTOMATIC•gas
14 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor524Torque4415Fluid6DTC957Battery1Maintenance0Recalls14
P1269high severityPowertrain

Immobilizer Code Not Programmed

on 2016 Ford Explorer 3.5L V6 · FWD

What this code means

The PATS immobilizer code has not been programmed into the PCM. This typically occurs when a new PCM is installed without completing the security programming procedure.

Symptoms

  • Engine will not start
  • Security light on or flashing
  • No fuel delivery or spark

Common causes

  • New PCM installed without PATS programming
  • PCM memory corruption
  • Failed key programming procedure

Diagnostic steps

  1. Verify PCM is programmed with PATS codes
  2. Perform key programming procedure
  3. Check for PCM software updates

Repair notes

Program PATS codes into PCM using dealer-level scan tool. Program at least 2 keys.

🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2016 Ford Explorer repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Explorer — $99 →
Building an app?
Free API access to all this data — 20 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →