The 2019 Explorer is the last year of the fifth-generation platform (2011-2019), carrying forward well-documented transmission and drivetrain issues that plagued this entire generation. The 3.5L EcoBoost variant has serious engine longevity concerns, while all models suffer from PTU and transmission cooler failures.
Power Transfer Unit (PTU) Failure on AWD Models
Common · high severity
Typical onset: 60,000-100,000 mi
Symptoms: Grinding or whining noise from front differential area, Metal shavings in PTU fluid, AWD malfunction warning light, Binding sensation during tight turns
Fix: PTU rebuild or replacement required. The unit shares fluid circuit with transmission and frequently runs low on fluid due to inadequate service intervals. Requires 3-4 hours labor for R&R, plus fluid service for transmission. Ford revised the service interval but damage is often done by the time owners find out.
Symptoms: Transmission slipping or harsh shifts, Coolant mixing with transmission fluid (strawberry milkshake fluid), Engine overheating, Transmission overheating warning, White smoke from exhaust
Fix: Internal cooler in the radiator fails, allowing coolant and ATF to cross-contaminate. Requires radiator replacement, complete transmission fluid flush (often multiple times), and frequently full transmission replacement if contamination circulated too long. This is a 6-8 hour job minimum if trans needs replacement. Catching it early with fluid checks is critical.
Estimated cost: $800-1,200 for cooler/flush only; $3,500-5,500 if transmission damaged
3.5L EcoBoost Carbon Buildup and Engine Failure
Occasional · high severity
Typical onset: 80,000-130,000 mi
Symptoms: Misfires and rough idle, Loss of power under load, Excessive oil consumption (1 qt per 1,000 mi or worse), Knocking or ticking noises, Check engine light with misfire codes
Fix: Direct injection causes severe carbon buildup on intake valves. Combined with timing chain tensioner wear and inadequate oil change intervals, these engines can suffer catastrophic failure including spun bearings, broken pistons, and scored cylinder walls. Walnut blastingvalves runs $400-700, but many engines need full rebuilds or short block replacement at 15-20 hours labor.
Estimated cost: $600-900 for carbon cleaning; $6,000-9,000 for engine rebuild/replacement
Rear Shock Absorber and Suspension Bushing Failure
Common · medium severity
Typical onset: 50,000-90,000 mi
Symptoms: Clunking noise over bumps from rear, Excessive body roll in turns, Uneven tire wear on rear, Floating or bouncy ride quality
Fix: Rear shocks wear prematurely, and the rear lower control arm bushings tear. Ford issued a recall for rear suspension components but not all failure modes are covered. Replacing both rear shocks and lower control arm bushings takes 3-4 hours. Use quality aftermarket shocks, OEM units have same short lifespan.
Estimated cost: $800-1,400
Front Driveshaft Center Support Bearing Failure (AWD)
Occasional · medium severity
Typical onset: 60,000-100,000 mi
Symptoms: Vibration at highway speeds, Clunking when accelerating from a stop, Squeaking or grinding noise from underneath vehicle center
Fix: The two-piece front driveshaft's center support bearing fails, causing vibration and noise. Requires driveshaft removal and either bearing replacement or full driveshaft replacement. 2-3 hours labor. This often gets misdiagnosed as transmission or PTU issues initially.
Estimated cost: $500-900
Door Ajar Warning and Latch Failures
Common · low severity
Symptoms: Door ajar warning with all doors closed, Interior lights staying on, Doors not latching securely, Power sliding door malfunctions on Limited/Platinum
Fix: Door latch assemblies fail internally, causing false warnings or actual latching problems. Affects all doors but driver and rear hatch most common. Each latch replacement is 0.5-1.0 hour labor. Ford had multiple TSBs but no comprehensive recall. Replace failed latches individually as they occur.
Estimated cost: $200-400 per latch
Water Pump Failure (3.5L Engines)
Occasional · high severity
Typical onset: 80,000-120,000 mi
Symptoms: Coolant leak from front of engine, Whining or grinding noise from accessory drive, Engine overheating, Coolant level dropping
Fix: Water pump fails with little warning. On 3.5L engines (both NA and EcoBoost), this requires removing the timing cover and is an 8-10 hour job. Always replace timing chains, guides, and tensioners at the same time since you're in there. This is preventive maintenance territory at 100k miles.
Estimated cost: $1,800-2,800
Owner tips
Check PTU fluid every 30k miles on AWD models and change it — Ford's schedule is inadequate
Inspect transmission fluid color regularly; any pink tint means cooler is failing
Use top-tier fuel and Italian tune-ups on EcoBoost to minimize carbon buildup
Budget for timing chain service at 100k miles on 3.5L engines to prevent catastrophic failure
Avoid the 3.5L EcoBoost if buying used unless complete service history proves religious maintenance
Hard pass unless you find a unicorn with documented PTU services and you're getting a 3.5L naturally aspirated or 2.3L EcoBoost — the 2020+ redesign is a much better platform.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
Fitment notes: EcoBoost engine requires higher CCA rating; verify clearance for taller batteries
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Every control module on the 2018-2019 Ford Explorer — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
⚠️ Key programming requires all keys present; integrated with BCM
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
Ford Motor Company (Ford) is recalling certain 2016-2019 Explorer vehicles. The roof rail covers may come loose and detach from the vehicle.
Consequence: A detached roof rail cover can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will inspect the roof rail covers and as necessary, repair or replace the push-pins, rail clips, or roof rail covers, free of charge. Interim letters, notifying owners of the safety risk, are expected to be mailed August 24, 2026. Additional letters will be sent once the remedy is available, anticipated in September 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S54. This recall expands previous NHTSA recall number 21V316. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on July 16, 2026.
SUSPENSION:REAR · 26V101000
2026-02-20
Ford Motor Company (Ford) is recalling certain 2017-2019 Explorer vehicles. The rear suspension toe links may fracture.
Consequence: A rear toe link fracture can result in a loss of steering control, increasing the risk of a crash.
Remedy: Dealers will replace the toe links, free of charge. Owner notification letters were mailed on March 16, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S08. This recall is an expansion of previous NHTSA recall number 21V537. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning February 25, 2026.
Ford Motor Company (Ford) is recalling certain 2016-2018 Focus, 2019 Explorer, and 2024 Explorer vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Consequence: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded blanking plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed February 13, 2026. Additional letters will be sent once the final remedy is available, anticipated in October 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on January 16, 2026. This recall expands previous recall number 25V685.
STRUCTURE:BODY:ROOF AND PILLARS · 24V031000
2024-01-19 · PE23001
Ford Motor Company (Ford) is recalling certain 2011-2019 Explorer vehicles. The A-pillar trim retention clips may not be properly engaged, allowing the trim to detach.
Consequence: A detached trim piece can fall off the vehicle, becoming a road hazard and increasing the risk of a crash.
Remedy: Dealers will inspect and replace the A-pillar trim as necessary, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model years. Owner notification letters were mailed between July 18, 2024 and December 16, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S02.
STRUCTURE:BODY · 21V316000
2021-05-05
Ford Motor Company (Ford) is recalling certain 2016-2019 Explorer vehicles. The retention pins could loosen and allow the roof rail covers to detach from the vehicle.
Consequence: A detached roof rail cover can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will install push-pins and replace any damaged rail clips and roof rail covers, as necessary, free of charge. The interim owner notification letter was mailed on June 22, 2021. Owner notification letters (remedy available) were mailed on October 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S22.
SEATS:FRONT ASSEMBLY:RECLINER · 19V633000
2019-08-28
Ford Motor Company (Ford) is recalling certain 2018-2020 F-150 and 2019-2020 F-250, F-350, F-450, and F-550 Super Duty pickup trucks, and 2018-2019 Ford Explorer, 2019-2020 Expedition, and 2020 Escape vehicles equipped with driver and/or passenger's manual front seat back recliner mechanisms. Also included are certain 2020 Ford Explorer and Lincoln Aviator vehicles equipped with rear outboard seats and manual seat back recliner mechanisms. The recliner mechanisms may be missing the third pawl required for seat back strength, resulting in a loose seat back. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 202, "Head Restraints" and 207, "Seating Systems."
Consequence: A seat back with an improperly assembled recliner mechanism may have reduced strength and may not adequately restrain an occupant in a crash, increasing the risk of injury.
Remedy: Ford will notify owners, and Ford and Lincoln dealers will inspect the seat structure and replace them, as necessary, free of charge. The recall began October 21, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19C07.
Performance
Horsepower
365hp
Torque
350lb-ft
0–60 mph
5.6sec
Quarter mile
14.2sec
Top speed
143mph
Capability & size
Towing capacity
5,000lb
Payload
1,480lb
Curb weight
4,700lb
Wiper blades
5th generation (2011-2019). Both front wipers are same length.
Size-standard part numbers — verify your connector type before buying. Rear blades are model-specific; check the package's vehicle list.
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2019 Ford Explorer 3.5L V6 EcoBoost and can vary by trim.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years.