P0880moderate severityPowertrain
TCM Power Input Signal
on 2017 Ford F-150 3.5L V6 EcoBoost · RWD
What this code means
The transmission control module is not seeing the expected power input signal. This usually points to a wiring or supply problem feeding the TCM.
Symptoms
- Erratic or harsh shifting
- Transmission warning light on
- Transmission may go into limp mode
Common causes
- Corroded or loose TCM power connector
- Blown or weak fuse feeding TCM
- Damaged wiring to the TCM
- Faulty transmission control module
Diagnostic steps
- Check and clean TCM power connectors
- Test fuse and power supply to TCM
- Measure voltage at TCM power input pin
- Inspect wiring harness for damage or shorts
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open