P0076moderate severityPowertrain
Intake Valve Control Solenoid Circuit Low (Bank 1)
on 2018 Ford F-150 3.5L V6 EcoBoost · RWD
What this code means
The intake valve control solenoid circuit on bank 1 shows low voltage. This can cause improper intake valve timing control.
Symptoms
- Rough idle
- Loss of power
- Check engine light on
Common causes
- Short to ground in circuit
- Faulty intake valve solenoid
- Damaged wiring
- Failed PCM driver
Diagnostic steps
- Scan for related codes
- Inspect wiring for short to ground
- Measure solenoid circuit voltage
- Test solenoid resistance
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open