P3802high severityPowertrain
48V Belt Starter-Generator Performance
on 2018 Ford F-150 3.5L V6 EcoBoost · RWD
What this code means
The belt-driven starter-generator (BSG) is not producing expected torque output for engine starting, boost assist, or energy recovery.
Symptoms
- Slow engine cranking
- No electric torque assist
- Weak regenerative braking
- Increased fuel consumption
- Belt squeal during start
- Vibration during BSG operation
Common causes
- BSG internal fault
- Drive belt slip
- Belt tensioner wear
- BSG bearing failure
- Inverter module fault
Diagnostic steps
- Check BSG torque output via scan tool
- Inspect drive belt condition and tension
- Listen for BSG bearing noise
- Test BSG inverter module
- Monitor BSG temperature during operation
Repair notes
Replace BSG unit if internal fault confirmed. Replace drive belt and tensioner if slipping. BSG and belt are a common service item together.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1