P0450low severityPowertrain
Evaporative Emission System Pressure Sensor/Switch Malfunction
on 2019 Ford F-150 3.5L V6 EcoBoost · RWD
What this code means
The PCM detected a fault with the EVAP pressure sensor or switch. This can prevent accurate monitoring of fuel vapor system pressure.
Symptoms
- Check engine light on
- Failed emissions test
- No driveability change
Common causes
- Faulty EVAP pressure sensor
- Wiring or connector fault
- Damaged fuel tank or vapor lines
- Failed PCM input circuit
Diagnostic steps
- Retrieve code and freeze frame
- Inspect pressure sensor wiring
- Test sensor signal and reference voltage
- Verify EVAP system integrity
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open