P1455moderate severityPowertrain
EVAP System Leak Detected (Gross Leak / No Flow)
on 2011 Ford F-250 6.2L V8 · 4WD
What this code means
The PCM has detected a large leak in the Evaporative Emission Control System, or there is no flow through the system. This indicates a significant breach in the sealed EVAP system.
Symptoms
- Check Engine Light
- Fuel odor
- Poor engine performance possible
- Difficulty refueling
- Failed emissions test
Common causes
- Loose or damaged gas cap (most common)
- Cracked or disconnected EVAP hoses
- Faulty purge valve
- Damaged charcoal canister
- Fuel tank or filler neck damage
- Missing or damaged EVAP system component
Diagnostic steps
- Inspect gas cap — tighten or replace
- Visual inspection of all EVAP hoses and connections
- Smoke test EVAP system to locate leak
- Test purge and vent valves
- Inspect charcoal canister
- Check fuel filler neck
Repair notes
Replace gas cap first (most common). Smoke test to find larger leaks. Replace damaged hoses or components.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1