Every control module on the 2011-2016 Ford F-350 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Power Steering Control Module (PSCM) 2.5 hr R&R dealer / factory tool +0.5 hr Electric power steering (gasoline engines) ▸ programming details
📍 Integrated with electric power steering column assembly under instrument panel
🔧 Ford IDS with VCM II
⚠️ Diesel models use hydraulic steering; no PSCM. Requires steering angle sensor calibration after replacement.
Body Control Module (BCM) 2.0 hr R&R dealer / factory tool +1.0 hr ▸ programming details
📍 Behind center of instrument panel, above center floor tunnel
🔧 Ford IDS with VCM II
⚠️ Stores as-built configuration data for body functions, lighting, and accessory control. Configuration must be transferred or rebuilt from VIN.
Transmission Control Module (TCM) 2.0 hr R&R dealer / factory tool +0.6 hr ▸ programming details
📍 6R140 transmission: external on driver side of transmission case, mid-body
🔧 Ford IDS with VCM II
⚠️ All 2011+ use 6R140 with external TCM. Requires VIN programming and adaptive learning reset. Transmission fluid change recommended.
Restraints Control Module (RCM) 1.8 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Under center console, floor tunnel below radio stack
🔧 Ford IDS with VCM II
⚠️ Security-linked module. Requires crash data clear and configuration. Console removal required for access.
Anti-Lock Brake System Module (ABS) 1.5 hr R&R relearn only +0.3 hr ▸ programming details
📍 Engine compartment, driver side frame rail near master cylinder
🔧 Ford IDS or aftermarket scan tool
⚠️ Brake bleeding required after replacement. Module auto-configures; steering angle sensor calibration required.
Door Zone Module (DZM) 1.5 hr R&R aftermarket tool +0.3 hr Power windows and locks (standard on most trims) ▸ programming details
📍 Inside each front door, behind door panel near latch
🔧 Ford IDS or aftermarket
⚠️ Controls window, lock, mirror, and seat memory functions for that door. Driver and passenger doors each have separate DZM.
Gateway Module (GWM) 1.5 hr R&R dealer / factory tool +0.8 hr ▸ programming details
📍 Behind instrument panel, left of steering column near BCM
🔧 Ford IDS with VCM II
⚠️ Translates between HS-CAN, MS-CAN, and LIN networks. 2015-2016 models may have early security gateway; programming lockout possible.
Heating Ventilation Air Conditioning Module (HVAC) 1.5 hr R&R aftermarket tool +0.3 hr Automatic climate control ▸ programming details
📍 Behind center instrument panel, integrated with climate control head unit
🔧 Ford IDS or Autel/Launch
⚠️ Manual HVAC systems use non-programmable control head. Auto-configuration typically sufficient.
Transfer Case Control Module (TCCM) 1.5 hr R&R aftermarket tool +0.3 hr 4WD models with electronic shift-on-the-fly ▸ programming details
📍 Attached to transfer case assembly, driver side of case
🔧 Ford IDS or aftermarket
⚠️ Manual-shift transfer cases use mechanical linkage; no TCCM. Electronic module controls shift motor and mode selection.
Powertrain Control Module (PCM) 1.2 hr R&R dealer / factory tool +0.8 hr ▸ programming details
📍 Engine compartment, driver side firewall mounted on bracket
🔧 Ford IDS with VCM II
⚠️ Requires VIN-specific calibration download and PATS parameter reset. 6.7L diesel uses different PCM location on passenger side valve cover.
Telematics Control Unit (TCU) 1.2 hr R&R dealer / factory tool +0.5 hr SYNC with 911 Assist or MyFord Touch ▸ programming details
📍 Behind instrument panel, right side near glove box
🔧 Ford IDS with VCM II
⚠️ Provides cellular connectivity for emergency calling and remote services. Subscription activation required after replacement.
Trailer Brake Controller (TBC) 1.2 hr R&R aftermarket tool +0.2 hr Factory integrated trailer brake controller ▸ programming details
📍 Under instrument panel, left of steering column near brake pedal bracket
🔧 Ford IDS or aftermarket
⚠️ Aftermarket controllers mount in same area. Factory unit communicates with BCM and ABS for coordinated braking.
Front Lighting Control Module (FLCM) 1.0 hr R&R aftermarket tool +0.3 hr HID headlights or automatic headlights ▸ programming details
📍 Behind front bumper, driver side near headlight assembly
🔧 Ford IDS or aftermarket
⚠️ Standard halogen systems controlled by BCM; no separate FLCM. HID ballast control and auto-leveling when equipped.
Suspension Control Module (ASCM) 1.0 hr R&R dealer / factory tool +0.4 hr with rear air suspension (camper package) ▸ programming details
📍 Under driver seat or behind kick panel
🔧 Ford IDS with VCM II or FDRS
⚠️ Controls rear air spring compressor and leveling valves. Ride height calibration required after replacement.
Instrument Cluster (IC) 0.8 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Instrument panel, behind gauge cluster lens
🔧 Ford IDS with VCM II
⚠️ Odometer programming requires dealer tool and legal documentation. As-built configuration required for proper gauge operation.
Fuel Pump Driver Module (FPDM) 0.8 hr R&R no coding Gasoline engines only
📍 Rear frame rail, driver side ahead of fuel tank
⚠️ Controls fuel pump speed via PWM signal from PCM. Diesel models use mechanical lift pump; no FPDM.
Parking Aid Module (PAM) 0.8 hr R&R aftermarket tool +0.2 hr Rear parking sensors ▸ programming details
📍 Behind rear bumper, center mounted near hitch receiver
🔧 Ford IDS or aftermarket
⚠️ Controls ultrasonic sensors in rear bumper. Front sensors added 2013+; module location unchanged.
Audio Control Module / SYNC Module (ACM) 0.8 hr R&R aftermarket tool +0.3 hr ▸ programming details
📍 Behind center instrument panel, integrated with radio head unit
🔧 Ford IDS or aftermarket
⚠️ SYNC 1 and SYNC with MyFord Touch systems require module configuration. Software updates available via USB or IDS.
Rear View Camera Module (RVCM) 0.5 hr R&R no coding Rear view camera
📍 Integrated with tailgate handle camera assembly
⚠️ 2013+ models with MyFord Touch use digital camera signal to ACM. Earlier models analog video.
Solar Sensor Module (SSM) 0.3 hr R&R no coding Automatic climate control
📍 Top of instrument panel, center near windshield
⚠️ Sunload sensor for automatic HVAC control. Plug-and-play; no programming required.
Passive Anti-Theft System Module (PATS) dealer / factory tool +0.5 hr ▸ programming details
📍 Integrated within PCM (engine control module)
🔧 Ford IDS with VCM II
⚠️ Not a separate physical module; PATS function integrated in PCM. Key programming requires IDS; two programmed keys required to self-program additional keys.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour?
Tell us — corrections ship fast here.