Every control module on the 2023-2026 Ford F-350 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Heating Ventilation Air Conditioning Module (HVAC) 3.0 hr R&R aftermarket tool +0.3 hr ▸ programming details
📍 Behind center instrument panel, integrated with HVAC housing
🔧 Ford FDRS or Autel
⚠️ Automatic climate control requires configuration
Transmission Control Module (TCM) 2.8 hr R&R security gateway +0.7 hr ▸ programming details
📍 External on driver side of transmission case
🔧 Ford FDRS + J2534
⚠️ TorqShift 10-speed; adaptive learning reset required after programming
Power Steering Control Module (PSCM) 2.5 hr R&R dealer / factory tool +0.5 hr Electric power steering (gas engines) ▸ programming details
📍 Integrated with electric power steering column assembly below instrument panel
🔧 Ford FDRS + J2534
⚠️ Diesel models use hydraulic steering; steering angle sensor calibration required
Body Control Module (BCM) 2.0 hr R&R security gateway +1.0 hr ▸ programming details
📍 Behind center of instrument panel, above center floor tunnel
🔧 Ford FDRS + J2534
⚠️ Stores as-built configuration; security gateway authentication required
Surround View Camera Module (SVCM) 2.0 hr R&R dealer / factory tool +0.4 hr 360-degree camera system ▸ programming details
📍 Integrated with BCM or separate module behind instrument panel
🔧 Ford FDRS + J2534
⚠️ Four cameras (front, rear, side mirrors); calibration required
Active Park Assist Module (APAM) 1.8 hr R&R dealer / factory tool +0.5 hr Active Park Assist 2.0 ▸ programming details
📍 Behind instrument panel or integrated with BCM
🔧 Ford FDRS + J2534
⚠️ Automated parking system; calibration for ultrasonic sensors and steering control
Anti-Lock Brake System Module (ABS) 1.5 hr R&R dealer / factory tool +0.5 hr ▸ programming details
📍 Engine compartment, driver side frame rail near master cylinder
🔧 Ford FDRS + J2534
⚠️ Brake bleeding required; integrates traction and stability control
Door Zone Module (DZM) 1.5 hr R&R aftermarket tool +0.3 hr Power windows/locks/mirrors ▸ programming details
📍 Inside each front door, behind door panel
🔧 Ford FDRS or Autel
⚠️ One per front door; controls windows, locks, mirrors, memory seats
Radar Module (RADAR) 1.5 hr R&R dealer / factory tool +0.5 hr Adaptive cruise control / Pre-collision assist ▸ programming details
📍 Behind front grille, center mounted
🔧 Ford FDRS + J2534
⚠️ Forward radar sensor; aiming calibration required after replacement
Gateway Module (GWM) 1.5 hr R&R security gateway +0.8 hr ▸ programming details
📍 Behind instrument panel, left of steering column
🔧 Ford FDRS + J2534
⚠️ Central network hub with security gateway; as-built data critical
Powertrain Control Module (PCM) 1.2 hr R&R security gateway +0.8 hr ▸ programming details
📍 Engine compartment, driver side firewall mounted on bracket
🔧 Ford FDRS + J2534
⚠️ Security gateway authentication required; VIN-specific calibration and PATS link
Accessory Protocol Interface Module (APIM) 1.2 hr R&R dealer / factory tool +0.6 hr ▸ programming details
📍 Behind center touchscreen display in instrument panel
🔧 Ford FDRS + J2534
⚠️ SYNC 4 system; as-built configuration required
Trailer Brake Control Module (TBC) 1.2 hr R&R aftermarket tool +0.2 hr Factory integrated trailer brake controller ▸ programming details
📍 Behind instrument panel, left of steering column near brake pedal
🔧 Ford FDRS or Autel
⚠️ Calibration for trailer weight and brake gain; Pro Trailer Backup Assist integration
Passenger Seat Module (PSM) 1.2 hr R&R aftermarket tool +0.2 hr Power passenger seat ▸ programming details
📍 Under passenger seat, integrated with seat frame
🔧 Ford FDRS or Autel
⚠️ Controls seat position, heating, cooling; separate from OCSM
Parking Aid Module (PAM) 1.0 hr R&R aftermarket tool +0.2 hr Front or rear parking sensors ▸ programming details
📍 Behind rear bumper, center mounted
🔧 Ford FDRS or Autel
⚠️ Ultrasonic sensor system; calibration for sensor alignment
Suspension Control Module (SCM) 1.0 hr R&R dealer / factory tool +0.5 hr with adaptive steering or off-road suspension package ▸ programming details
📍 Frame rail, passenger side, behind cab
🔧 Ford FDRS + J2534
⚠️ Controls adaptive dampers when equipped. Not present on base suspension.
Transfer Case Control Module (TCCM) 1.0 hr R&R aftermarket tool +0.3 hr 4WD models ▸ programming details
📍 Mounted on transfer case, passenger side
🔧 Ford FDRS or Autel
⚠️ Electronic shift-on-the-fly transfer case
Restraints Control Module (RCM) 1.0 hr R&R security gateway +0.6 hr ▸ programming details
📍 Under center console, floor tunnel below shifter
🔧 Ford FDRS + J2534
⚠️ Crash data clearing and occupant classification calibration required
Telematics Control Unit (TCU) 1.0 hr R&R dealer / factory tool +0.4 hr ▸ programming details
📍 Behind center instrument panel, near APIM
🔧 Ford FDRS + J2534
⚠️ Standard 4G LTE modem for FordPass Connect; subscription activation required
Front Lighting Control Module (FLCM) 1.0 hr R&R aftermarket tool +0.3 hr LED or HID headlights ▸ programming details
📍 Behind front bumper, driver side near headlight assembly
🔧 Ford FDRS or Autel
⚠️ Configuration for auto high-beam and adaptive lighting if equipped
Fuel Pump Control Module (FPCM) 0.8 hr R&R no coding Gas engines ▸ programming details
📍 Frame rail, driver side near fuel tank
⚠️ Diesel models do not use FPCM
Battery Energy Control Module (BECM) 0.8 hr R&R dealer / factory tool +0.5 hr with intelligent battery monitoring system ▸ programming details
📍 Under hood, passenger side fender near battery
🔧 Ford FDRS + J2534
⚠️ Monitors battery state of charge and health. Requires battery registration after replacement.
Instrument Panel Cluster (IPC) 0.8 hr R&R security gateway +0.5 hr ▸ programming details
📍 Instrument panel, behind gauge face
🔧 Ford FDRS + J2534
⚠️ Mileage programming and as-built configuration required; 12-inch digital cluster available
Passive Anti-Theft System Module (PATS) security gateway +0.5 hr ▸ programming details
📍 Integrated within BCM
🔧 Ford FDRS + J2534
⚠️ Function within BCM; key programming required
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour?
Tell us — corrections ship fast here.