Free API
P0814low severityPowertrain

Transmission Range Display Circuit

on 2012 Ford Focus 2.0L I4 GDI · FWD

What this code means

A fault was detected in the transmission range display circuit. This affects the gear position indication shown to the driver.

Symptoms

  • Incorrect gear display
  • Missing range indicator
  • Warning light illuminated

Common causes

  • Faulty range sensor
  • Wiring or connector fault
  • Instrument cluster fault
  • Control module communication issue

Diagnostic steps

  1. Read stored trouble codes
  2. Inspect range sensor and wiring
  3. Verify range signal to cluster
  4. Repair circuit or replace faulty part

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2012 Ford Focus repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Focus — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →